Technical Specifications:

  • Suppression of background noise by interference filters for different wave lengths
  • Phase modulation technology to reconstruct lightwaves smaller than 10nm
  • Uses Computer guided shutter of a CCD-Sensor which enables independent adjustment/adaptation of speckle sizes
  • Adjustable integration times (Shutter, CCD-Sensor) and high sensor sensitivity enlargen and improve an effective measuring field even if reflection conditions should be disadvantageous
  • Extremely good signal-to-noise ratio at 12bit (16bit internal procession)
  • High spatial resolution (recommended is 1392 x 1040 = 1.447.680) with individual flexibility by partial scanning of the CCD-camera and binning mode (VGA at 2x2 pixels) for enlargened sensitivity (factor 4) and higher frame rates
  • Usage of laser diode arrays on request allows the application of Laserclass 2M (at 400mW)
  • Vibration measurement up to 50kHz (100kHz) - no limitation of frequency due to time averaging method
  • Compact rack system: 60 cm x 55 cm x 40 cm
 

The sensor head line SE3-NDT only requires a standard PC or Laptop combined with the SE3 Control Box (new and available since 12/2007) connected by PCI-Express.

(Measurements: 15x14x20cm including function generator and Synch.-System.)

Vibrography
 

Copyright by isi-sys GmbH, T:++49 (0) 561-739798-0, info@isi-sys.com, last update on 11. oct 2011

Information:
+49 5617397980
info@isi-sys.com
Impressum

News:
Vacuum hood
Suction cup tripod
NDT Set